Sensing devices used with electronic controls
WATTCO™ process duct heaters are installed in forced air ducts and used for industrial processes (forced air dryers, core drying, annealing) that require medium to high air temperature (at least 750 ºF/400 ºC).
Process duct heaters come with the same standard and optional features as air duct heaters.
Finned Elements Without Fittings
Finned Elements Without Fittings
Finned Elements With Fittings
Finned Elements With Fittings
CPO-T1 strip heaters are made of two offset bolt type terminals at one end.
CPS-T1 strip heaters are made of two bolt type terminals at one end.
CPO-T2 strip heaters are made of two bolt type terminals at opposite ends.
CPF-T1 strip heaters are made of two offset bolt type terminals at one end.
2 1/2" - 3" Cold Section - 150 lb. Steel Flange.
3" - 3" Cold Section - 150 lb. Steel Flange
4" - 3" Cold Section - 150 lb. Steel Flange
5" - 3" Cold Section - 150 lb. Steel Flange
6" - 3" Cold Section - 150 lb. Steel Flange
8" - 3" Cold Section - 150 lb. Steel Flange.
10" - 3" Cold Section - 150 lb. Steel Flange.
12" - 3" Cold Section - 150 lb. Steel Flange.
14" - 3" Cold Section - 150 lb. Steel Flange.
WATTCO™ open coil elements are especially made to fit inside standard 2 or 3" schedule 40 NPS pipes. They are used in tank and pipe heating, and metal tubing. A minimum clearance of 1/8" is required between the ceramic and the inside wall of the tube. Installing an open coil element assembly in a schedule 40 NPS pipe will provide excellent and uniform heat distribution over large surface areas.
WATTCO™ open coil elements are an indirect heating solution to decrease the watt density requirements or the heat fluxes on the surface area of the pipe connected to the heated section and prevent heat sensitive materials from coking or breaking down.
WATTCO™ large tank heaters consist of three specific heating systems, open coil element pipe insert heaters, single immersion heaters, and flexible tank heaters that can be used in large storage tanks. These systems can be installed in steel, concrete, or fiberglass above or below ground tanks.
WATTCO™ large tank heaters are the best solution for applications that require little or no manual attention and provide small amounts of heat to maintain temperature levels in the tank during the daytime and high performance during nighttime.
These heaters are first-class quality replacement solutions for all heater applications.
WATTCO™ silicone rubber heaters are composed of fiberglass enhanced silicone rubbers that are moisture and chemical resistant. Thin and flexible, these heaters are designed to meet the requirements of various low and medium temperature applications that require irregular shapes, sizes, and dimensions.
WATTCO™ silicone barrel heaters are designed to brace a drum and are easy to install and remove. They are primarily used for pre-heating solutions in drums or pails in order to make them more fluid and flowable. Silicone barrel heaters are the ideal solution for heating liquids in pouring, dipping, coating, and mixing applications.
WATTCO™ band heaters are the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. The various types of band heaters available at WATTCO™ include mica insulated band heaters and ceramic band heaters.
Select among the electrical terminations based on the requirements of application. Each termination has its own features, benefits, and limitations.
Select among the electrical terminations based on the requirements of application. Each termination has its own features, benefits, and limitations.
WATTCO™ cartridge heaters are made of a swaged construction that consists in a high-grade nickel chromium resistance wire wound around a high-quality MgO core that is centered in a stainless steel casing.
Cartridge heaters are used for several heating metal parts and can be fitted with threaded bushings for liquid heating for certain applications. Cartridge heaters will reach metal temperatures of up to 1400 ºF (760 ºC) with the appropriate material, watt density, and fit selections. Maximize element life and value with WATTCO™ cartridge heaters.
