| Items |
 /Asset/a1200.jpg FLC1230X1021 30 Kilowatt (kW) Power Copper Sheath Material High Density 6 Inch (in) Flange Size Immersion Heater |
/Asset/a1200.jpg FLC1240X1025 40 Kilowatt (kW) Power Copper Sheath Material High Density 6 Inch (in) Flange Size Immersion Heater |
/Asset/a1200.jpg FLC1245X1028 45 Kilowatt (kW) Power Copper Sheath Material High Density 6 Inch (in) Flange Size Immersion Heater |
/Asset/a1200.jpg FLC1250X1030 50 Kilowatt (kW) Power Copper Sheath Material High Density 6 Inch (in) Flange Size Immersion Heater |
/Asset/a1200.jpg FLC1560X1029 60 Kilowatt (kW) Power Copper Sheath Material High Density 6 Inch (in) Flange Size Immersion Heater |
|||||
| Description |
6" - 3" Cold Section - 150 lb. Steel Flange Without thermostat. |
|||||||||
| Brands | WATTCO™ | |||||||||
| Flange Size | 6 in | |||||||||
| Flange Rating | 150 lb | |||||||||
| Dimension A | 5 in | |||||||||
| Dimension C | 9-1/2 in | |||||||||
| Dimension D | 11 in | |||||||||
| Dimension E | 8 in | |||||||||
| Dimension F | 7/8 in | |||||||||
| Dimension G | 1 in | |||||||||
| Dimension H | 6 3/4 in | |||||||||
| Power | 30 kW | 40 kW | 45 kW | 50 kW | 60 kW | |||||
| Immersion Length B | 533 mm21 in | 635 mm25 in | 711 mm28 in | 762 mm30 in | 737 mm29 in | |||||
| Phase | 1 3 | |||||||||
| Voltage | 208 V240 V480 V600 V | |||||||||
| Power Density | 64.9 W/in² | 67.6 W/in² | 65.3 W/in² | 66.3 W/in² | 66.5 W/in² | |||||
| Approximate Net Weight | 52 lb | 52 lb | 52 lb | 52 lb | 62 lb | |||||
| Flange Material | Steel | |||||||||
| Cold Section | 3 in | |||||||||
| Sheath Material | Copper | |||||||||
| Approximate Power Density | 65 W/in² | |||||||||
| Moisture Resistant K | 7 in | |||||||||
| Moisture Resistant L | 10 1/8 in | |||||||||
| Explosion Resistant K | 7 1/2 in | |||||||||
| Explosion Resistant L | 9 in | |||||||||
| Application | Clean Water Freeze Protection Hot Water Storage Boiler and Water Heaters Cooling Towers Solutions not Corrosive to Copper | |||||||||
| Note |
When ordering, please specify: Quantity, catalogue number, voltage, phase, wattage, material to be heated, flowing or static mediums, types of controls to be applied, type of metal or alloy of the container, any extra features. Customers must always advise if flange immersion heaters are for steam pressured applications |
|||||||||
|
|
||||||||||
